Esteam Peroxicap Prespray - SanitaireCommercialVacuum.com
Esteam Peroxicap is a 5 in 1 multi-purpose hydrogen peroxide-activated and encapsulating polymer-fortified carpet cleaning agent. It combines a synergistic hydrogen peroxide detergent blend with a special encapsulating polymer. The special peroxide blend oxygenates and activates the cleaning power of the polymers and surfactants, and also helps effectively remove many spills and spots (coffee, wine, blood, urine-caused discoloration, and more) during the cleaning process. The encapsulating polymer bonds to, surrounds, and encapsulates soil. This encapsulated residue left in the carpet following cleaning can be extracted from the carpet during the post-cleaning and/or vacuuming process.
The encapsulating polymers in Peroxicap also assist the carpet after cleaning at fighting against re-soiling. Carpets cleaned with encapsulating polymers have been demonstrated to stay cleaner longer than when traditional cleaning solutions are used. Peroxicap can be used effectively as a hot water extraction prespray, a low moisture encapsulation cleaner, a bonnet cleaning solution, an encapsulating hot water extraction rinse, and as a carpet spotting agent.
Because much of its cleaning effectiveness is created by the peroxide activation and encapsulating polymers, Peroxicap does not need to use harsh solvents and high pH phosphates, making it safe and effective to use on all synthetic carpets as well as wool carpets.
DIRECTIONS
Always pretest the surface being cleaned for colorfastness with a solution before proceeding.
For use as a low moisture encapsulation cleaner: Mix 1 part chemical solution with 12 parts water (10 ounces to a gallon). Apply with a pump-up pressure sprayer, electric
sprayer, or battery sprayer in an even, overlapping pattern across the area to be cleaned. Apply just enough solution for the carpet to be moist to the touch. Agitate the solution into
the carpet thoroughly with a counter-rotating cylindrical brush machine, a shampoo brush, a triple-planetary rotary brush machine, or an orbital or oscillating pad machine.
Allow the cleaning solution to dry completely. Vacuum the carpet at the next scheduled vacuuming interval.
For use as a bonnet cleaner:
Mix 1 part chemical solution with 12 parts water (10 ounces to a gallon). Apply to the bonnet pad and carpet with a pump-up pressure sprayer, electric sprayer, or battery sprayer in
an even, overlapping pattern across the area to be cleaned. Apply just enough solution for the carpet to be moist to the touch. Agitate the solution into the carpet with your bonnet
pad. Allow the cleaning solution to dry completely. Vacuum the carpet at the next scheduled vacuuming interval.
For use as a traffic lane cleaner: (carpet prespray or
preconditioner) Mix 1 part chemical solution with 12 parts water (10 ounces to a gallon). Apply with a pump-up pressure sprayer, electric sprayer, or battery sprayer in an even, overlapping pattern across the area to be cleaned. Apply just enough solution for
the carpet to be moist to the touch. Apply a heavier amount in more soiled areas. Allow 5-10 minutes of dwell time. Work into the carpet pile with Grandi-Groomer or Grandi-
Brush. Extract the carpet and apply prespray solution with a compatible extraction rinse solution.
For use as a hot water extraction rinse detergent:
• For portable extractors or walk-behind extractors, mix 2 ounces of cleaning solution per five gallons of water in the solution tank of the equipment
• For truck mounts or metered portable extractors, mix one quart of solution (32 ounces) with five gallons of water. Set solution flow meter to equipment manufacturers recommended
setting.
For use as a carpet spotter:
Mix 1 part Peroxicap with three parts water (4:1). Saturate the spot being treated with the mixed solution. Let the solution dwell for 2 -3 minutes. Blot with a towel. Extraction is
not normally required.
For use as an upholstery cleaning agent:
Mix one chemical solution with 12 parts water (10 ounces to a gallon) in a trigger, pump up pressure, electric, or battery sprayer. Apply the solution evenly across the fiber. Agitate and gently brush the fabric with a (hand bonnet mitt, horse hair brush, or equivalent SOFT bristled brush). For low moisture cleaning, simply allow the solution to dry and vacuum off. For extraction cleaning, extract with a fresh water rinse.
RTU pH: 8.0 - 9.0
Compare to:• Jon-Don Matrix® Super Encapsulant• Release-it® Encap-Hydrox• Vacaway® Hot Knife 
